We may earn a commission from links on this page.

DeWalt FlexTorq 40-piece case open at a three-quarter angle, bits and nut drivers in yellow holders

Hand tools & accessories · DeWalt

DeWalt FlexTorq Impact Ready Screw Driving Set (40 pc)

Impact-rated bits in a clear-lid case, so the right bit is always in the box (and doesn't snap in an impact driver).

Check price on Amazon AU: DeWalt FlexTorq Impact Ready Screwdriving Set, 40 pc (DWA2T40IR) (affiliate link) Prices and stock change often: Amazon shows today's price and the seller.

Model: DeWalt FlexTorq Impact Ready Screwdriving Set, 40 pc (DWA2T40IR)
Updated

The short version

The DeWalt FlexTorq Impact Ready set (DWA2T40IR) is 40 impact-rated screwdriving pieces in a small ToughCase+ with a clear lid. The bits have a flex zone designed to absorb an impact driver's hammering instead of snapping. It suits anyone who owns an impact driver, whatever battery brand it runs on.

Best for

  • Impact driver owners
  • Decks and pergolas
  • Any battery brand

What it does

Bits made for impact drivers

Ordinary bits can snap or round off under an impact driver's hammering. FlexTorq bits have what DeWalt calls an extended FlexTorq zone, a section of the shank that DeWalt says can flex up to 15 degrees to soak up those peaks while still transferring torque. The tips are CNC-machined for a close fit in the screw recess, which DeWalt says reduces cam-out.

FlexTorq case opened flat showing all 40 pieces, including long bits, nut drivers and the sleeve

Three lengths, plus the extras

The set has 25 one-inch (about 25 mm) bits, nine 2¼ in (about 57 mm) bits and one 3½ in (about 89 mm) bit. Short bits keep an impact driver compact in tight spots; the longer ones reach into recesses and past hinges. Two nut drivers, a socket adaptor and a magnetic bit tip holder round it out.

Magnetic screw lock sleeve

The included sleeve slides over a bit and holds the screw in line, which helps when you're starting screws one-handed, at arm's length or overhead. DeWalt says it minimises drops and wobble, so fewer screws end up in the garden bed under the deck.

A clear-lid case that connects

The clear lid shows at a glance which bit hasn't come back, and a clip latch keeps it shut. DeWalt's patented bit-bar lets you pop bits out and rearrange them. The case is the small bulk size in DeWalt's connectable ToughCase+ system and fits inside the small and medium ToughCase+ (sold separately).

Closed FlexTorq case from the front, bits visible through the clear lid

Specs & dimensions

ModelDWA2T40IR
Pieces40
Screw bits25 × 1 in, 9 × 2¼ in, 1 × 3½ in
ShankHex
Flex zoneUp to 15°
Bit tipsCNC-machined
CaseToughCase+ small bulk size, clear lid, clip latch

From DeWalt's published specifications (sources below). Check the listing for the exact colour and pack before you buy.

In the box

  • 25 × 1 in screw bits
  • 9 × 2¼ in screw bits
  • 1 × 3½ in screw bit
  • 2 × nut drivers
  • 1 × socket adaptor
  • 1 × magnetic bit tip holder
  • 1 × magnetic screw lock sleeve
  • ToughCase+ small bulk case

Who it suits

  • Owners of any impact driver: the bits have hex shanks, so the set isn't tied to DeWalt's batteries.
  • DIYers starting a deck, a pergola or a fence, where hundreds of screws go in at once.
  • Anyone tired of hunting through a loose tin of bits, since every piece has its own slot.

FAQ

Will these fit a Makita, Ryobi or Milwaukee impact driver?

Yes. They're hex-shank bits, the standard fitting for impact drivers and drill chucks, so they aren't limited to DeWalt tools.

Can I use impact bits in an ordinary drill?

Yes, impact-rated bits work in a drill-driver too. It's the other way round that causes trouble: ordinary bits can snap in an impact driver.

What's the socket adaptor for?

It lets the hex chuck on your driver turn sockets, which is handy for coach screws and bolts. DeWalt lists one in the set but doesn't state its drive size.

Does the case work with other DeWalt storage?

It's the small bulk size in DeWalt's ToughCase+ system and fits inside the small and medium ToughCase+ cases, which are sold separately.

How to choose the best battery platform for power tools in Australia, what "skin only" means, and how to avoid US 120 V chargers on imported kits.

New to Amazon Prime? Try Prime free for free delivery on eligible items (affiliate link).

How this page was put together

This is research-based buying advice, written from the maker's published specifications, manuals and common owner feedback. We haven't tested this product ourselves and it wasn't sent to us. Sources:

DeWalt FlexTorq Impact Ready Screw Driving Set (40 pc)

Check price on Amazon AU: DeWalt FlexTorq Impact Ready Screwdriving Set, 40 pc (DWA2T40IR) (affiliate link)