We may earn a commission from links on this page.

DeWalt DCS356N multi-tool in yellow and black, three-quarter view with blade clamp, no battery, on white

Power tools · DeWalt

DeWalt DCS356N 18V XR Oscillating Multi-Tool (skin only)

The one cordless tool that flush-cuts, scrapes and sands in the spots nothing else can reach.

Check price on Amazon AU: DeWalt DCS356N-XJ 18V XR Brushless Oscillating Multi-Tool (skin only) (affiliate link) Prices and stock change often: Amazon shows today's price and the seller.

Model: DeWalt DCS356N-XJ 18V XR Brushless Oscillating Multi-Tool (skin only)
Updated

The short version

The DeWalt DCS356N is an 18 V XR brushless oscillating multi-tool with a three-position speed selector and tool-free blade changes. It flush-cuts, plunge-cuts, scrapes and sands in spots a saw can't reach. It's sold skin only, so it suits people who already own DeWalt 18 V batteries.

Best for

  • DeWalt 18 V owners
  • Renovation jobs
  • Flush and plunge cuts

What it does

Three speed settings plus a variable trigger

A three-position switch caps the top speed at 15,000, 17,000 or 20,000 oscillations per minute, and the variable-speed trigger works within that limit. DeWalt pitches the lower settings for more control on delicate materials, such as starting a cut in a painted door jamb or sanding a thin veneer. The top setting is for faster cutting.

Side profile of the DCS356N showing the 18V XR brushless badge and slim grip, on white

Blade changes without a key

DeWalt's Quick-change accessory clamp lets you swap blades and pads by hand, without hunting for a hex key. That matters on a multi-tool more than most tools, because a typical job moves from a wood blade to a nail-cutting blade to a sanding pad within minutes.

Gloved hand working the DCS356N's blade clamp lever, dusty tool in a dark workshop

Fits most brands of blade

The included universal accessory adaptor lets the tool take most other brands' oscillating accessories, according to DeWalt. You're not locked into one brand's blades, which helps because blades wear out and the hardware store near you might stock a different brand.

The awkward-job tool

DeWalt's manual lists detail sanding, plunge cutting, flush cutting, removing excess material and surface preparation as its jobs. In practice that means trimming a door jamb so new flooring slides under, cutting a hole in plasterboard for a power point, removing old silicone or cutting out a damaged board. A bright LED lights the cut line.

Specs & dimensions

ModelDCS356N-XJ (tool only)
Voltage18 V (DeWalt XR)
MotorBrushless
Oscillation rate0–20,000 per minute
Speed settings15,000 / 17,000 / 20,000 per minute
Oscillation angle1.6°
Accessory changeTool-free Quick-change clamp
Weight (without battery)1.1 kg

From DeWalt's published specifications (sources below). Check the listing for the exact colour and pack before you buy.

In the box

  • DCS356 multi-tool (no battery or charger)
  • Universal blade adaptor
  • Blade adaptor hex key
  • 31 × 43 mm Fastcut wood blade
  • 31 × 43 mm wood-with-nails blade
  • Sanding pad
  • Assorted sanding sheets

Who it suits

  • DeWalt 18 V XR owners, who can add it to the kit using batteries they already have.
  • Renovators fitting new floors, doors or kitchens, where flush cuts and small plunge cuts come up constantly.
  • Anyone cleaning up a bathroom, since the same tool can scrape out old sealant and sand back patches.

FAQ

Does the DCS356N come with a battery?

No. The N (and -XJ) means tool only: DeWalt states there's no battery or charger in the box. It runs on DeWalt 18 V XR batteries, which are sold separately.

Will other brands' blades fit?

DeWalt says the included universal accessory adaptor fits most oscillating tool accessory brands. Check the blade's fitting type before you buy a large pack.

What's the difference between the DCS356 and the DCS355?

They share a manual and a 1.6° oscillation angle. The DCS356 adds the three-position speed selector that caps the top speed at 15,000, 17,000 or 20,000 per minute.

Can it sand as well as cut?

Yes. A sanding pad and assorted sanding sheets are in the box, so it can sand into corners and along edges as well as cut.

How to choose the best battery platform for power tools in Australia, what "skin only" means, and how to avoid US 120 V chargers on imported kits.

New to Amazon Prime? Try Prime free for free delivery on eligible items (affiliate link).

How this page was put together

This is research-based buying advice, written from the maker's published specifications, manuals and common owner feedback. We haven't tested this product ourselves and it wasn't sent to us. Sources:

DeWalt DCS356N 18V XR Oscillating Multi-Tool (skin only)

Check price on Amazon AU: DeWalt DCS356N-XJ 18V XR Brushless Oscillating Multi-Tool (skin only) (affiliate link)