
Workbenches · WORX
WORX Pegasus Work Table and Sawhorse
A folding work table that flips into a pair of sawhorses, with clamps that lock into the top.
Check price on Amazon AU: WORX Pegasus Multi-Function Work Table and Sawhorse (WX051) (affiliate link) Prices and stock change often: Amazon shows today's price and the seller.
Model: WORX Pegasus Multi-Function Work Table and Sawhorse (WX051)
Updated
The short version
The WORX Pegasus (WX051) is a folding work table that flips into a sawhorse, with two quick clamps and four clamp pegs that lock into the top. It folds flat to hang on a wall, so it suits small garages and sheds where a fixed bench would take the car's or the mower's space.
Best for
- Small garages
- Cutting sheet goods
- Fold-away workspace
What it does
Table to sawhorse, no tools
In table mode the Pegasus gives a 78.7 × 63.5 cm work surface at 81.3 cm high. Flip it over and it becomes a sawhorse for cutting long boards or a sheet of ply, with indentations along the top that hold a standard 2 × 4. WORX says it changes between modes in seconds with no assembly required.

Clamps that lock into the top
Two quick clamps slide along channels in the tabletop, and four clamp pegs (dogs) sit in 19 mm holes you can move them between. Together they hold straight boards and odd shapes still while you cut, drill or sand, which is the job a plain trestle can't do without extra clamps.

Rated for real loads
WORX rates the table mode at up to 135 kg and the sawhorse mode at up to 450 kg, with locking legs. That's plenty for cutting, sanding, assembly and painting. A lower shelf holds tools or a power board, which keeps leads and offcuts off the floor while you work.

Folds flat, links up
Folded, it's about 12.7 cm thick (WORX quotes 5 in), so it hangs on a wall hook or slides in beside the car. If one table isn't big enough, WORX's link-lock system joins several Pegasus tables into a larger surface, which is handy for a door, a benchtop or a full sheet of MDF.
Specs & dimensions
| Model | WX051 |
|---|---|
| Work surface (table mode) | 78.7 × 63.5 cm |
| Height (table mode) | 81.3 cm |
| Load, table mode | Up to 135 kg |
| Load, sawhorse mode | Up to 450 kg |
| Folded thickness | About 12.7 cm (5 in) |
| Dog holes | 19 mm |
| Clamping | 2 quick clamps, 4 clamp pegs |
| Warranty | 1 year (WORX Australia) |
From WORX's published specifications (sources below). Check the listing for the exact colour and pack before you buy.
In the box
- Pegasus work table and sawhorse (WX051)
- 2 × quick clamps
- 4 × clamp pegs
Who it suits
- Single-garage owners who need a work surface that folds away when the car comes back in.
- DIYers cutting sheets of ply or MDF, since sawhorse mode supports the sheet and the clamps hold it.
- Renters who can't build a fixed bench but still want somewhere steady to work.
FAQ
How much weight can it take?
WORX rates it to 135 kg in table mode and 450 kg in sawhorse mode.
Is it strong enough to be a workbench?
For cutting, sanding, assembly and painting, yes. For heavy hammering or mounting a big vice, a fixed timber bench is the better choice.
Does it need assembly?
No. WORX says it converts from work table to sawhorse in seconds with no assembly required, and the clamps and pegs come in the box.
Before you buy
How to set up a shed workshop without a renovation: a folding workbench, rechargeable work lights, a safe step ladder and tips for hot Colorbond sheds.
- How to set up a shed workshop: a workbench, light and a proper step ladderWorkshop · 4 min read
- Christmas gifts for dads who have everything: the 2026 DIY guideGifts · 5 min read
- Garage organisation ideas for Australian homes, from a small garage to a full shedStorage · 5 min read
Related products
How this page was put together
This is research-based buying advice, written from the maker's published specifications, manuals and common owner feedback. We haven't tested this product ourselves and it wasn't sent to us. Sources:



